Open the app
ServicesAIMessagingPricingBlog Open the app

How to look up your rate under the DDS rate models

DDS posts every rate reform rate on its Complete Rate Models by Regional Center page, with two files for each of the 21 Regional Centers: a Rates Only spreadsheet and a Complete Rate Models PDF. Open your Regional Center's Rates Only file, find your service code, staffing ratio and subcode, and read across to the column that matches your quality incentive status: the full rate, 95 percent or 90 percent.

Updated 19 November 2026 ยท 7 minute read

The short version

  • The Rates Only spreadsheet gives the number you bill; the Complete Rate Models PDF shows how DDS built it.
  • On 19 November 2026, the posted files were the 2026 Rates Only (updated November 16, 2026) and the 2026 Complete Rate Models (updated October 27, 2026).
  • Which column applies depends on how much of the quality incentive your vendor number earned: 100, 95 or 90 percent.
  • Rates differ by Regional Center and change during the year, so check the effective date on the line and keep the file you used.
  • Services outside rate reform are not in these files; their rates come from other schedules or from negotiation with your Regional Center.

Where the files are

Everything is on one DDS page: Complete Rate Models by Regional Center. Each of the 21 Regional Centers has its own pair of links. On 19 November 2026 they were:

  • 2026 Rates Only (Updated 11/16/2026), an Excel file. DDS says it "provides the full rates as of July 1, 2026" and also shows the base rate (90 percent of the full rate) and the incentive portion.
  • 2026 Complete Rate Models (Updated 10/27/2026), a long PDF with the cost build-up behind each rate.

DDS notes the files are not readable by screen readers and offers help by email at RatesQuestions@dds.ca.gov.

This article does not quote dollar figures. Rates differ by Regional Center and staffing ratio and change more than once a year. Always read the current file for your own center.

Step by step: find your rate in the Rates Only file

  1. Open the DDS page and find your Regional Center's name. If you serve people from more than one center, ask your vendoring Regional Center which center's rates your authorizations use.
  2. Download the 2026 Rates Only file for that center.
  3. Find your service by name. The service code sits in the last column on the first line of each service.
  4. Pick the line for your staffing ratio and billing unit. Supported living, independent living and personal assistance each have lines for 1:1, 1:2 and 1:3. Some services have more than one billing unit: in the San Gabriel/Pomona file, supported living (896) has hourly lines and a line billed by the mile.
  5. Note the DDS subcode on that line. In the same file, personal assistance (062) uses subcodes 100, 200 and 300 for the three ratios. This is the subcode on your Service Acknowledgement Form and your authorization.
  6. Check the Effective Date column. DDS asks readers to "note the effective dates listed in column D". The supported and independent living lines in the San Gabriel/Pomona file show July 1, 2026.
  7. Read across to the right rate column, explained below.
ColumnWhat it holds
First two columnsService name and the variation, usually the staff-to-person ratio such as 1:1
Billing UnitThe unit you bill in, such as an hour or a mile
Effective DateThe date the rate on that line took effect
Full Rate100 percent of the rate model: base plus the whole incentive
95% of Full RateBase plus half the incentive, where the incentive is split into two 5 percent parts
90% of Full RateThe base rate alone
DDS SubcodesThe subcode you bill with
Service CodeThe three-digit code, shown on the first line of each service

Which column is yours

The column follows your quality incentive status for the current incentive year, and it is decided separately for each vendor number. DDS's June 2026 directive says its status list shows "whether each vendor has earned 90, 95 or 100 percent of the rate model rates effective July 1, 2026."

You can see your own status in the FY 2026-27 incentive status spreadsheet on DDS's QIP page, updated monthly. It also gives a QIP rate start date, which matters if you caught up late.

The 95 percent column is only filled where a service can earn half the incentive. In the San Gabriel/Pomona file it is blank for supported and independent living, because for 2026-27 those codes earned the whole 10 percent through one survey. How the incentive works, and the deadlines for 2027-28, are in the Quality Incentive Program article.

Reading the Complete Rate Models PDF

The PDF opens with a table of contents by service and a summary of rates, then one page per rate model. Each model page has two columns: the statewide Base Model and the column for your Regional Center. Reading down, the rows add up the cost of one billable hour:

  • Direct care staff: share of staff working full time, hourly wage, benefit rate, workers' compensation, and an overtime allowance.
  • Productivity adjustments: travel time between individuals, recordkeeping and reporting, supervision and other employer time, training and paid time off, which turn total hours into billable hours.
  • Mileage: miles traveled per 40-hour week and the amount per mile.
  • Supervision: supervisor wage and the number of direct care staff per supervisor.
  • Staff meals, program operations and an administration percentage, ending in the rate per billable hour.

As an example of what the inputs look like, the 1:1 supported living model in the San Gabriel/Pomona file assumes 70 percent of direct care staff work full time and applies an administration percent of 12.0 percent.

It also matters for wages. A part of the rate reform law written for the January 2023 increase says a provider "shall not spend a smaller percentage of the rate increase on direct care staff wages and benefit costs than the corresponding percentage included for direct care staff wages and benefit costs in the rate models," and must keep documentation subject to audit. Ask your accountant how that applies to your books.

Check the rate against your authorization

The rate you can bill is the one on your purchase of service authorization, which your Regional Center sets up from the posted rate. Compare the authorization's service code, subcode, unit and rate with the line you found. The authorization article explains what each field means.

If you run supported living, Lanterlink bills each visit under service code 896 against the person's authorization.

If the numbers differ, write to your vendoring Regional Center with the file name, its update date and the line you used. Keep a copy of that file: DDS moves older versions to an archive on the same page, which now reaches back to January 2024, so you can rebuild what applied on any date.

When the files change, and what is not in them

DDS has updated the Rates Only files several times in 2026 alone: February 5, June 8, July 1, July 15, September 16, September 24 and November 16. Two changes DDS has documented are the January 2026 minimum wage and the federal mileage rate. On July 1, 2026 the IRS mileage rate rose from $0.725 to $0.76, and DDS raised the models that include mileage. For January 2026 minimum wage, DDS said rate reform providers did not need to request anything.

Not every service is here. DDS's Reimbursement Rates page lists separate schedules, including Coordinated Family Supports (076) and Self-Determination Program financial management rates, and the Medi-Cal schedule of maximum allowances. Rates negotiated with a Regional Center stay with that center. For how rate reform changed supported and independent living codes, see the SLS and ILS article.

Questions agencies ask

Is the rate for the same service the same at every Regional Center?

No. DDS posts separate files for each of the 21 Regional Centers, and the rate reform law calls for rates adjusted for local costs such as wages, travel and real estate. Always use the file for the right center.

Why does the spreadsheet show 95 and 90 percent columns?

Ninety percent is the base rate. The rest is the quality incentive, and for some services it is earned in two 5 percent parts, which gives the 95 percent level. Your column depends on what your vendor number earned for the current incentive year.

My authorization shows a different rate from the DDS file. What do I do?

Check that you are using the right center's file, the right subcode and ratio, and the effective date on the line. If it still differs, send your vendoring Regional Center the file name, its update date and the line you used, and ask them to correct the authorization or explain the difference.

Can I see what the rate was last year?

Yes. The DDS rate models page keeps an archive of earlier Rates Only files, going back to the January 2024 rate model rates. Use it when you check a past invoice or a retroactive payment.

Where are rates for services that are not part of rate reform?

They are not in the rate model files. DDS's Reimbursement Rates page links to other schedules, and negotiated rates are set with your Regional Center.

Lanterlink is software for California Regional Center vendors

Scheduling, visit verification, Regional Center billing, payroll preparation, training records and incident reports in one system, set up for each service you run.

Keep reading

Sources

  1. DDS: Complete Rate Models by Regional Center (Rate Models and Rates) Read 12 November 2026.
  2. DDS: San Gabriel/Pomona Regional Center 2026 Rates Only file (updated 9/24/2026) Read 12 November 2026.
  3. DDS: San Gabriel/Pomona Regional Center Complete Rate Models (prepared by Burns & Associates, September 24, 2026; posted 10/27/2026) Read 12 November 2026.
  4. California Legislative Information: Welfare and Institutions Code section 4519.10 Read 12 November 2026.
  5. DDS directive D-2026-Quality Incentive Program-004: FY 2026-27 QIP Vendor Status List (June 3, 2026) Read 12 November 2026.
  6. DDS: Quality Incentive Program (QIP) page Read 12 November 2026.
  7. DDS directive D-2025-Quality Incentive Program-015, Attachment B: QIP Rate Structure for FY 2026-27 Read 12 November 2026.
  8. DDS directive D-2026-Rates-007: Updated Rate Models Effective July 1, 2026, IRS Mileage Increase (September 16, 2026) Read 12 November 2026.
  9. DDS: Minimum Wage 2026 Read 12 November 2026.
  10. DDS: Reimbursement Rates Read 12 November 2026.

This article is general information for agency owners, not legal advice. Rules and rates change; check the source before you rely on a detail.